Se hai intenzione di realizzare il tuo pavimento in legno compensato, quindi assicurarsi di dare un'occhiata a questa lista – ti farà risparmiare tonnellate di tempo… e la sanità mentale :).

Abbiamo scritto dettagliato articoli per ciascuno di tali progetti (vedi sotto per i link) ma abbiamo anche voluto scrivere un breve articolo mettendo in evidenza le grandi punte di risparmio di tempo che abbiamo.

Here are the 3 things you need to know for making your own wide plank plywood floors. Seguendo questi suggerimenti renderà il vostro progetto senza intoppi e si ritroverà con pavimenti in compensato migliori dall'aspetto.

Suggerimenti per pavimenti in compensato fai-da-te

Prima un suggerimento bonus – Tagliare i bordi Yourself

si, è un po 'diverso per ottenere il bonus suggerimento prima, ma alcune delle punte di nuovo su questo piggy. Quindi ha senso di condividere questa prima.

E so che il taglio delle tavole da soli suona come l'opposto di un risparmio di tempo, ma lasciatemi spiegare.

There are a few posts out there that recommend having the person at Lowes or Casa Depot ha tagliato il compensato in assi per te.

So che sembra che ti farebbe risparmiare un sacco di tempo, perché stai scaricando il taglio su di loro, ma non consiglierei di farlo.

Abbiamo avuto casa negozi di miglioramento tagliato il compensato per noi su altri progetti in passato.

Anche se lo fa risparmiare tempo – non pensiamo che ne vale la pena. I loro tagli non sono molto precisi, piace molto imprecisa.

Che possono essere perfettamente trovare per alcuni progetti, ma con questo progetto i tagli consistenti sono importanti.

Avere schede che sono tutti circa la stessa larghezza permette il progetto di andare più liscia, più facile e il risultato finale sarà molto più piacevole.

#1 Make A Jig

#2 Don’t Use A Plywood Blade

Questo merita un altro OMG. I tried using a plywood blade to cut the plywood into planks initially (cause you know, it’s plywood) but that was a BIG MISTAKE!

Ignora le lame di compensato – anziché, utilizzare le lame a taglio incrociato.

Come ho detto in articolo pavimentazione sala da pranzo, la lama di compensato non riusciva nemmeno a passare attraverso due fogli di compensato.

Quando ho usato la lama a taglio incrociato, un lama singola ha fatto il resto del compensato per la sala da pranzo e anche per il soggiorno!!

Se stai tenendo il punteggio, the plywood blade barely ripped 2 sheets of plywood into planks and the cross-cut blade did 19 sheets – e può ancora fare di più.

Questa è senza dubbio la migliore lama per tagliare assi di compensato. Ha tagliato il compensato come il burro, e inoltre non scheggiava affatto il legno.

(Fare clic sull'immagine per ordinare la stessa lama che abbiamo usato su Amazon)

#3 Skip Sanding Between Polyurethane Coats

Oltretutto, i dossi sarebbero aggiungere un po 'più consistenza rendendo i piani meno scivoloso.

L'unica preoccupazione che avevamo era come si sentirebbe camminare a piedi nudi sul pavimento con più consistenza. Quando abbiamo fatto le nostre mani sulle tavole abbiamo potuto chiaramente sentire la consistenza aggiuntivo, quindi eravamo un po 'nervosi.

Bene, si scopre, la consistenza supplementare era appena percettibile quando si cammina a piedi nudi sul pavimento. Uff, che è stato un sollievo!

Ecco qui

Questi sono i nostri suggerimenti per il risparmio di tempo per i piani in compensato di larghezza della plancia fai da te. These few simple tips will save you HOURS and HOURS of time. Without them, il nostro progetto avrebbe richiesto molto più tempo e sarebbe stato più difficile da fare.

I primi due punte da soli vi salverà da tirare i capelli!

Speriamo che vi aiuterà con il proprio ampio listone pavimenti in compensato.

Fateci sapere cosa ne pensate!

Godetevi questo post? Appuntalo e condividilo con gli altri!

Il primo progetto di pavimento in assi larghe della fattoria realizzato con compensato che abbiamo realizzato è stato nella sala da pranzo all'inizio dell'anno.

Bene, ci è piaciuto così tanto che abbiamo realizzato lo stesso ampio pavimento in assi nel soggiorno.

Per la maggior parte, entrambi i pavimenti sono stati realizzati allo stesso modo, con un paio di eccezioni. In questo articolo, esamineremo le differenze tra i due piani.

Controlla la articolo per pavimento in compensato per sala da pranzo per vedere ulteriori dettagli passo dopo passo.

Per quanto riguarda il tempo, Per completare l'ampio pavimento in assi della sala da pranzo è stata necessaria circa una settimana, mentre per il soggiorno è stato necessario molto più tempo.

Il soggiorno è un po' più grande, ma ciò che ha davvero aggiunto tempo al progetto sono stati lo scintillio e il end pavimenti grano intarsio.

Dall'inizio alla fine, ci sono volute poco più di due settimane per finire il pavimento del soggiorno.

Cosa abbiamo fatto di diverso con questo pavimento in assi larghe della fattoria

I metodi che abbiamo utilizzato per il pavimento nella sala da pranzo e il soggiorno erano più o meno gli stessi.

Nel soggiorno, abbiamo tirato su il vecchio tappeto, graffette rimosse, ha dipinto il sottopavimento di un colore scuro e ha posato il pavimento nello stesso modo in cui è stato fatto nella sala da pranzo.

La larghezza, la lunghezza e lo spessore delle assi di compensato erano gli stessi, e tagliamo, levigato, angosciato, colorato e aggiunti 3 strati di poliuretano alla pavimentazione Quasi allo stesso modo.

Abbiamo apportato alcune piccole modifiche che ci hanno fatto risparmiare un po' di tempo e potrebbero aver aggiunto un po' più di carattere al nostro pavimento in assi di compensato fai-da-te.

Ecco le cose che abbiamo fatto un po 'diversamente, questo va in giro.

Non abbiamo carteggiato tra i cappotti di poliuretano

Quando abbiamo fatto il pavimento della sala da pranzo, Abbiamo levigato leggermente i dossi dalla mano di poliuretano con 120 carta vetrata a grana.

Con i pavimenti del soggiorno, Abbiamo pensato che i dossi sulle assi di compensato sarebbero stati applicati un po 'dopo aver applicato più mani di poli.

Oltretutto, i dossi sarebbero aggiungere un po 'più consistenza rendendo i piani meno scivoloso. Non che i pavimenti della sala da pranzo siano scivolosi – era solo un modo per giustificarlo nella mia testa. 😉

L'unica preoccupazione che avevo era come si sarebbe sentito a piedi nudi sul pavimento con più consistenza.

Si scopre, nonostante sentendo chiaramente la trama aggiuntiva quando si esegue la mano sulla tavola, era appena percettibile quando si cammina su di esso a piedi nudi.

La lista della spesa

È stato utilizzato un nuovo generatore di personaggi

Abbiamo aggiunto Spessori

Il pavimento in compensato del soggiorno è finito!

Come ho detto, il pavimento del salotto ha preso molto più tempo per fare che il pavimento sala da pranzo ha fatto. Ci sono voluti poco più di due settimane per terminare, Non avevo incasinato con il pavimento in legno accento fetta, avremmo finito in circa 2 settimane.

Controlla la fetta pavimenti in legno accento progetto qui

Noi amiamo la fattoria ampia listoni sia nella sala da pranzo e il salotto. Questo stile è la misura perfetta per questa casa, non avremmo potuto immaginare una soluzione migliore.

Tra i due piani, Direi che mi atterrei ai gradini utilizzati sul pavimento del soggiorno.

La levigatura tra i poliziotti sembra non essere necessaria, and using the utility knife to expand on the cracks in the wood added sooo much more character to the living room floor – LOVE IT!

Here are a few more pictures of the stained plywood floors on the living room floor.

Fammi sapere cosa ne pensi, is there something you would have done differently? Are you thinking of doing DIY plywood floors in your home?

Condividi i tuoi pensieri nei commenti qui sotto!

Godetevi questo post? Appuntalo e condividilo con gli altri!

As you’d expect, DIY Rustic Wide Plank Plywood Flooring takes much longer to finish than just installing pre-made planks.

This project was the truest sense of DIY. Everything from cutting the plywood into wide plank boards, to sanding, staining, finishing and installing the plywood planks down… all of it DIY.

All things considered, the entire project, from start to finish didn’t take that long.

From cutting the planks out of plywood, to finally installing the floors in both the dining room and kitchen – took about a week.

If you’re willing to put in the time and sweat, it is absolutely worth it!

The floors look gorgeous (the pictures don’t do it justice) and you really would not know that they are stained plywood floors.

Read on to see what it took to make and install our rustic wide plank plywood floors and how you can install your own unique plywood flooring.

Table Of Contents

Why Use Plywood Flooring

The Down-side To Plywood Flooring

Plywood Plank Thickness

Plywood Plank Width

The Type Of Plywood

Before Pics

How Much Plywood We Used

Prepping The Subfloor

Subfloor Painting

Cutting The Planks

Making A Jig

Sanding The Plank

Adding Character

Burning The Plywood Boards

Staining The Planks

Applying The Finish

Laying The Planks

Securing The Planks

Some Pictures

Why We Chose Wide Plank Plywood Flooring

Some of the flooring in our Poconos vacation rental needed replacing. Namely, the floating hardwood floor in the dining room and kitchen and the carpet in the living room.

Our goal was to have new floors that look old, warm, and worn – like they had always been there. Basically, the more it looked like farmhouse flooring or barn wood the better it was for us.

We looked into tile, stone, and hardwood floors. The problem with all of them was that they all needed a level sub-floor and ours was uneven… like really uneven.

Since the entire house is made of rough-cut oak, the flooring is not even close to being level.

That makes tile, stone and even hardwood flooring very difficult to install. The extra difficulty also translates to very expensive installation costs.

It was time to get creative, DIY floors were in our future. To get more flooring ideas we turned to Pinterest. After a lot of scrolling, we came across rustic farmhouse wide plank plywood flooring!

On Pinterest, there was a gazillion (well maybe not quite that many) plywood flooring ideas, but the one that was the best fit for us was the wide plank flooring.

The pictures of the wide plank plywood flooring projects others had posted were incredible – this was it! This was the perfect flooring for uneven floors.

We were sold on the idea.

Why Use Plywood Flooring? It’s Affordable.

Most people decide to install plywood plank flooring because of it’s affordability.

It’s much cheaper to install a plywood floor than traditional hardwood or even a laminate, heck it’s even cheaper than doing vinyl.

For our plywood farmhouse floors, the cost wasn’t much of a factor in our decision-making process.

Don’t get me wrong, it’s always nice to save some dough… it was just lower on our list.

Higher on our list was flooring that was sturdy, looked like it has always been there, fit with the style of the house and would be easy to install on an uneven floor.

Between the option of making wider planks and the spacing between each one – wide plank plywood flooring was a perfect fit for this house.

The spacing between each board makes it more forgiving in scenarios like ours where the floor isn’t level.

On top of that, the Japanese concept I came across helped me realize that any blemishes the floor will gain as it ages will only add to the floor’s beauty.

So it didn’t need to be as sturdy as hardwood, we’ll just embrace the imperfections that come along with it! 🙂

Another Reason To Use Plywood Floor Planks? The Versatility

Another huge benefit to plywood floor planks is the design versatility.

I love how my plywood plank floors turned out. There really is nothing I would change, but one thing that’s great about plywood planks is that there is no limit to what you can do.

I LOVE the way the rustic plywood floor planks came out, but the plywood planks could have looked just as good with a modern look.

Take a look at plywood floor planks on Pinterest. You’ll see there is no limit to the style, color, shape, size, or texture. It’s all just a matter of preference – how cool is that?

The Cost Of Our DIY Plywood Flooring

We knew that we saved quite a bit of money by choosing plywood faux plank flooring but we didn’t realize how much until someone asked for a breakdown in the comments.

We saved a ton!!

Of course, what you save in dollars you lose in time. We didn’t look at it as a lose of time though, it saw it as a great way to get our creative juices flowing and gave us a flooring that is completely unique – and it saved us a bunch of money to boot! Win – win – win!

Total Cost
22 sheets of plywood @ $32/sheet = $704
17 quarts of stain @16.30/quart = $276
5 gallons of Poly @ $12/gallon = $60
TOTAL = $1040

Square Feet
22 Sheets * 32 sq. ft./sheet = 704 sq. ft.

$1040 / 704 sq. ft. = $1.47 per sq. ft.

The Down-side to Plywood Flooring

The only negative I saw with plywood floor planks was the durability. It’s not a hardwood so it would scratch easier than an oak flooring would.

Now with my new wabi-sabi perspective, I’m actually looking forward to the scratches and dents.

The blemishes will only add to the floor’s beauty. If there’s a scratch that is really ugly, I can add something creative to give it beauty.

Perfectly imperfect.

The Plywood Plank Flooring Thickness

The plywood plank flooring thickness we used is 1/2″ thick. If our floors weren’t so uneven we could have used 3/4″, but the flexibility that a 1/2″ plywood has was perfect to conform to our uneven sub-floor’s contours.

I think an added benefit to the 1/2″ plywood is that the spaces in between the planks doesn’t hold dirt as easily.

It may sound like that’s a bit of a stretch but I think if it was 3/4″ plywood, the extra 1/4″ of plywood thickness may make it harder for a vacuum to suck out things that get stuck in the spaces.

We weren’t sure how the spaces were going to fair with dust and things falling in them but so far so good – nothing a good vacuuming can’t fix. 🙂

Other than things possibly getting stuck in the spaces between the planks, I don’t see any reason you can’t use 3/4″ thick plywood for your plank flooring. That being said, I also don’t really see a benefit to using it over 1/2″ plywood.

The Plywood Plank Width

We wanted the farmhouse or country kind of look, so a wide plank is what we went with.

We also wanted to reduce the amount of wasted plywood, so the width we came up with was 5 7/8″ for each board. That gives us 8 planks per sheet and a tiny strip leftover at the end.

We’ve seen other plywood floors where they went for 8 inch or even 12 inch boards. We didn’t want to make them that wide because we felt it made it obvious that it was a plywood floor.

And a wide board would have shown the dreaded plywood zebra pattern that I don’t care for (more on the plywood zebra pattern later).

The Type Of Plywood We Used

Some Before Pics

How Much Plywood Do You Need

Prepping the Subfloor

Subfloor Painting

Cutting The Plywood Into Planks

The Best Saw Blade To Use

We had 10 sheets of plywood to cut into wide plywood planks. I figured that a plywood blade would be the best. I thought anything else would leave a really rough edge on the wood.

Well, I was very, very wrong.

Do Not Use A Plywood Blade – Use a Cross Cut Blade instead

The plywood blade didn’t last very long and took a lot of effort to go through the plywood. It started smoking and having a lot more difficulty cutting barely halfway into the second sheet of plywood.

I ended up having to go out and buy another blade. This time I tried a cross cut blade, OMG what a difference.

The cross cut blade went through the plywood like butter and left an even better cut than the plywood blade did. I was able to do the rest of the plywood using just that one cross cut blade.

If you want to get the same cross cut blade I used, just click the picture below.

The Jig

For more info on the jig and some extra tips on cutting the planks check out this post, 3 Time Saving Tips For DIY Plank Plywood Floors.

Sanding Each Plank

During this part of the project, you’ll have your doubts about using the gnarly part of the plywood.

BUT TRUST ME – once you put the stain on the plywood you will be blown away at how good it looks.

In the end, the most beautiful planks were the ones with imperfections.

Distressing The Plywood Plank Flooring

Adding Even More Character – Burning The Plywood Boards

Here’s a video of how we burned the rustic wide plank plywood flooring.

We Chose Gel Stain, This is Why

The Gel Stain We Chose

Staining Plywood Floors

Applying The Finish

Total Time: 2 people about a day and a half

For the finish we used a clear satin, water based, oil-modified polyurethane.

This product was perfect for our project because it didn’t change the color of the stain, dried quickly and best of all – it’s oderless!

If you’ve ever done any sort of polyurethane project. you know that the smell from polyurathane is no joke… and it lingers for days and days. This has no smell at all!

We went with a satin finish because we wanted an aged look and a glossy floor would be the opposite of that.

Three thin coats of poly were applied on all the boards, including the sides of the boards. Between each coat, we waited about 2 hours before applying the next coat.

We then waited 24 hours after the last coat before installing the boards.

We didn’t sand between the first and second coats but did do a light hand sanding with 120 grit sandpaper before applying the final coat.

The brush we used for the poly was a cheap wide (about 6″) synthetic brush.

We used 2 gallons of polyurethane for our project.

It’s All About That Space

The spaces between each plank were perfect for the style we were looking for.

The spacing would give it more of that farmhouse feel and prevent the buckling that the previous floor suffered from.

A few of the posts on Pinterest mentioned using quarters as spacers, so that’s what we used.

Our wide plank plywood flooring has small variations in the spacing, mostly because of the uneven floors – but that’s ok – wabi-sabi. 😉

Where To Start Laying The Plywood Planks

Make Sure To Space Out The Seams

Cutting The Plywood Boards To Length

I used a miter saw to cut the boards to length. Pretty straight forward. One tip is to make sure the blade reaches full speed before you start cutting into the plywood. That’ll give you a clean, smooth cut.

Securing The Rustic Wide Plank Plywood Flooring In Place

One More Note

The plywood flooring we installed is 1/2″ thick and the previous flooring was 3/8″ thick.

The 1/8″ difference meant any spaces where the previous flooring used to fit – the new flooring no longer did.

That difference meant a lot of undercutting. Not only the door moldings but all the furring strips that cover the seams of the oak boards on the walls.

I could have done it with a dovetail saw, but since I had quite a few cuts to do, I bought an oscillating tool. It worked perfectly!

The tool comes with a bunch of different attachments. I haven’t used it for anything else yet but I can think of a few different uses for it in the future.

All Done – That’s It!

So, all told, it took roughly a week to do the plywood plank floors – from complete start to complete finish. Including the old floor removal, subfloor painted, 10 sheets of plywood cut into strips, sanded, distressed, stained, polyied and installed.

This was a good sized project with a lot of effort put into it, but it was well worth it. We now have a completely unique floor that fits perfectly with the house, and looks fantastic!!

In the fall, we’re going to install the same rustic wide plank plywood flooring in the living room, and I’m really looking forward to it.

We’re also going to do a unique transition between the living room and dining room floors… can’t wait.

Some Pictures

Here’s some more pics of the work in progress and the finished plywood plank flooring.

Let me know what you think, is there something you would have done different?

Share your thoughts in the comments below!

Enjoy this post? Pin it and share it with others!