Although it may not have been in your Home Theater Design, you will need a home theater remote control.
Setting up a home theater buries you in remotes pretty quick. It becomes a 3 or 4 remote task to do anything unless you get a home theater remote.
There are a few different calibers of remote controls. If you only want to reduce the number of remote controls you have, then a basic universal remote would do the trick.
But, if you want a remote control that does more than control the A/V equipment, your choices will be slim.
Features like controlling lights and/or blinds. Or setting up macros/scenes which turn on and off various devices depending on the activity.
In this article, I’ll go over what I looked at when choosing my remote and how I set it up.
Disclosure: Some of the links below are affiliate links. If you decide to purchase any of these products, we earn a small commission at no additional cost to you. We recommend these products only because we have experience with them and use them for our own projects. As Amazon Associates, we earn from qualifying purchases.
Choosing the right remote control will completely change your home theater experience. A typical home theater will have at least 3 remotes (for the TV/Projector, surround sound, Cable box or DVD Player).
Fumbling between all the remote becomes a pain pretty quickly. Many of the remotes that come with home theater equipment do try to be universal-ish. But they still fall short with home theater scenarios.
The remote I was searching for would control:
On the low end, they are about $100. These remotes will have a low limit on the devices that can it can control and no macros. On the super fancy high end, there is a complete home automation system. That system can control just about any electronic device, but of course, it’s at a cost. The Savant is one of those systems and runs about $1000 a room.
For my scenario, I already have a home automation system so Savant wasn’t something I had any interest in.
My home automation system is an Insteon based system. A Universal Devices ISY controller (Model ISY 994i/IR Pro) that controls everything. Things like the door lock, the thermostats, lights, and door sensors.
After some research, it became clear the Harmony family of remotes is the best value for the features. They’ve been in the remote control business for a very long time and they have excelled over the years.
Which a Harmony remote, you base your choice on how many devices you plan on controlling. The Harmony remote I chose was the Ultimate Home. It can control up to 15 devices with up to 15 activities. The activities are basically macros. Press one of the macro buttons, and it’ll turn on all the devices you need turned on for that activity.
Update: The remote that I chose is now discontinued. The Logitech Harmony Elite Remote is the latest home theater remote from Logitech. It looks a little different but the specs are very similar.
An added bonus is that the Harmony Elite Remote also works with Alexa!
The Harmony Home Ultimate (and the Harmony Elite) is a feature-rich remote control.
There are three physical parts to the remote control. The remote control itself, a Hub and infrared blaster cables.
The hub is the brains of it all, and the remote control communicates to the hub using RF (radio). It’s great for home theater setups like mine, where the AV equipment is in a closet out of sight.
In this setup, there’s a total of 6 devices listed in the MyHarmony app:
Harmony has done a great job with their remote controls. The basic initial setup was pretty straight forward.
You’ll need to install their MyHarmony software and run the setup. You can either install it on your PC or on your phone and it will guide you through the setup process.
During setup, the hub was able to automatically detect the Yamaha amplifier on the WiFi. For the other devices (cable box, DVD player and projector) I needed to supply the make an model. Based on the make an model, it knew the full set of remote codes for them.
Much easier than the old days where you had to teach your universal remote the codes for each function.
If you have a theater like mine, you have AV equipment tucked away in a closet close by but out of sight.
The Harmony Hub goes in the closet along with all the AV equipment, but one gotcha is the projector.
Initially, I wasn’t sure if I’d have to run one of the infrared blasters into the theater to get it to turn on/off the projector.
Well, luckily Harmony had already thought of that. In the MyHarmony App, you determine what controls the device, either the remote or the hub.
That’s done here:
Problem solved.
Update: The solution above worked great, but it would only work if you were in the room to turn on the projector. I sometimes use the MyHarmony app on my phone to turn the theater equipment on or off from outside the room.
Like I said earlier, my home automation is Insteon based. When I was setting up my home theater I expected to one day be able to control the lights. And maybe even the curtains using my home theater remote control.
Insteon has a user-friendly device called InsteonHub, which Harmony can communicate with natively.
My setup uses a Universal Devices controller, which is more flexible but not as user-friendly. Initially, it didn’t seem obvious how I could get Harmony and Insteon to talk to each other.
At first, I thought I’d have to use some sort of Rest based commands to control the lights using the Harmony remote.
During my googling, I did see something using a Raspberry PI and something called ISY Helper to do just that.
From what I understand, the ISY Helper is the go-between for the Harmony and your ISY.
For my setup, it sounded like way too many moving parts.
Luckily the ISY I purchased had infrared, I think you can also buy the add-on module for the ISY if your ISY doesn’t have IR.
With the Insteon Hub, I think you can only control the lights. With the infrared module in the ISY, you can control everything that the ISY can control.
On the ISY you would create a program with the things you want the ISY to do. Then assign that program to an IR code.
Let’s say you want to set the temp at a certain level, dim the lights in the theater and lock the front door for the evening.
Create a program with those steps and assign it to an IR code. Now create an activity on your remote that sends that IR code, you’re all set!
Pretty cool! And you have no limit to the possibilities.
Actually, you only have 40 IR codes to play with. But each of those codes can be configured to do a whole lot on the ISY side.
Adding the ISY to the remote was straight forward. Add a new device in the Harmony app. And use Universal Devices as the manufacturer and ISY994i/IR as the model number.
As soon as you do that it will add the 40 infrared codes that the ISY uses into the remote.
To add the IR codes on the ISY side was just as easy. Go into the admin console, click the IR tab and click the ‘Import Default IR Codes’ button. That adds the same 40 infrared codes into the ISY.
When you are done watching TV and want to turn everything off, just press the button next to the activity again and it’ll turn everything off.
Now if you have a home theater and don’t yet have a remote control with macros, I think you can appreciate how this remote can have everything on, set and ready to go with the press of one button.
No more fumbling with every remote control you have to get things set up just to watch TV.
Before Harmony these were my steps:
A big difference in user experience.
In a way, the remote control is the mortar in the electronic building blocks of your home theater. It changes your experience completely.
Here are all my configured activities and settings. The “Lights – IR004” entry triggers the “Turning off the Movie Theater lights” program on the ISY.
The Watch Amazon activity is an example of an activity using cursor movements. The DVD Player has no built-in button for Amazon so I used cursor movements to select the AmazonApp.
I also added mute at the beginning and the volume down at the end because of an annoying ding sound the DVD player made. Every time the cursor in the interface moved there was a ding, and I didn’t like hearing it.
Did you like this post? Want more?
Get all of our best DIY tips directly in your inbox!
You have Successfully Subscribed!
Having a Harmony Home theater remote control is way better than trying to manage 6 remotes…. but I had no idea how much better the experience was going to be.
The remote control makes it a real pleasure to turn on and off your devices. If you have a home theater getting a Harmony remote control is a must!
The simplicity of use that a remote like this gives you is amazing.
In my opinion, a home theater design is incomplete if it doesn’t include a home theater remote control.
There are already wainscoting calculators out there but they're too complicated. This wainscoting calculator uses…
In this post we’ll go over how to paint laminate cabinets. We did this project…
Let me first say that converting a box spring into a platform bed is not…
The cutting is one of the two areas where you can save TONS of time……
In this post, I’ll go over what we did and why we did it. No…
This is Our Favorite Homemade Dog Flea Shampoo. It worked better than we could have…
View Comments
Long time supporter, and thought I'd drop a comment.
Your wordpress site is very sleek - hope you don't mind me asking what theme you're using?
(and don't mind if I steal it? :P)
I just launched my site --also built in wordpress like yours-- but the theme
slows (!) the site down quite a bit.
In case you have a minute, you can find it by searching for "royal cbd" on Google (would appreciate any feedback) - it's still in the works.
Keep up the good work-- and hope you all take care of yourself
during the coronavirus scare!
Hi Justin!
Sure, I’m using Divi from elegant themes. It’s really slick and pretty speedy. I also added page templates from a site I came across called DiviSoup. They had templates to change the look and feel of the home page, comments And posts. It made the site even prettier. :)
Hope that helps.
You too, take care and be safe!